- VMware NSX Cookbook
- Bayu Wibowo Tony Sangha
- 85字
- 2021-08-27 19:34:51
How to do it...
Follow these steps to enable CDO mode in a transport zone.
- Navigate to Networking & Security | Installation | Logical Network Preparation.
- Select the applicable transport zone. Click the Actions button in the center pane and select Enable CDO mode:
Click Yes when the confirmation dialog box appears.
- The applied transport zone will have its CDO mode enabled with a green tick. It will also show the segment ID number used for the CDO logical switch under the CDO Mode column:
